Stainless steels, FeNi alloys, Nickel and Nickel-based alloys, as well as Copper alloys are the principal materials for our metal foils. We produce them for highly specific applications.


10x thinner than a hair

We define metal foils as strip with a thickness of <50 µm. Stainless steel foils are used in precision measuring tapes, voice membranes, springs and spacer strips for double glazing. Nickel alloys can be used to manufacture bursting discs and components for medical engineering. Soft-magnetic foil is used to produce cable shielding, capacitor parts and components for acoustic instruments.
 

Metal foils of Auerhammer

› Soft-magnetic Iron-Nickel alloys FeNi36...FeNi80

› Pure Metals: Nickel

› Meta Alloys: FeNi, NiCr, NiCrFe, NiCu

› Copper Alloys: CuNi44Mn

› Stainless Steel: 1.4301, 1.4310

Thickness: 0.002 - 0.10  mm


Width: 1.0 - 105.0 mm

 

Foil is considered to be < 0.1 mm thick     

 

Additional dimensions available on request.

Condition: soft              Thickness: >= 10 μm     Width: 4 - 100 mm cut edge | 60 - 110 mm rolled edge

 

Condition: as-rolled      Thickness: >= 5 μm     Width: 2 - 100 mm cut edge | 60 - 110 mm rolled edge

 

Condition: as-rolled      Thickness: < 5 μm         Width:  50 - 110 mm rolled edge

 


If necessary, other dimensions up to 1 mm are possible.

                                                                             

Most of our foils are manufactured for special applications according to our customer specifications, whether they need pure metals or metal alloys. Mechanical properties can be tailored by means of the heat treatment process.

 

We would be happt to advise you: info@remove-this.auerhammer.com

Please, contact us:

Auerhammer Metallwerk GmbH
Hammerplatz 1
08280 Aue-Bad Schlema

Phone: +49 3771 272-0
Fax: +49 3771 272-201
info@remove-this.auerhammer.com